The best tanning bed cleaner is one designed specifically for tanning beds. It will contain both cleaning agents and disinfectants, or it will belong to a kit that provides these agents. The cleanser must avoid buildup that can block UVA and UVB rays, and for this reason some cleansers are designed specifically for a UVA or UVB tanning bed. Cleaners are generally available as premixed solutions, DIY mixes, and cleaning kits. For information on proper cleaning of all tanning bed components, refer to the bed’s instruction manual.
A tanning bed cleaner should do more than just clean your tanning bed. You should also sanitize and sanitize the bed. This is especially important considering the hair, sweat, and other body fluids, as well as the buildup of tanning lotion, which is left behind after each tanning session. Of course, since there are several types of tanning beds, the parts that are touched and contaminated vary. Still, every tanning bed is a dirty tanning bed after it’s been used.
Therefore, choosing a tanning bed cleaner with a sanitizing or disinfectant property is crucial. Regular water, even when mixed with soap, is not effective at cleaning a tanning bed. It can even damage acrylic and other parts of the bed. Some tanning bed owners believe that using water and white vinegar can properly clean and disinfect the bed, but in reality this mixture can also cause damage. Some manufacturers offer separate products to disinfect and clean a tanning bed, but it may be more convenient to purchase an all-in-one tanning bed cleaner and disinfectant.
Make sure the tanning bed cleaner you choose is made specifically for tanning beds. Other types of cleaners, such as kitchen and bathroom cleaners, can damage the acrylic on your bed. Your body can absorb any cleaner that is left behind, and most cleaners designed for tanning beds avoid this risk. Take the time to look for cleaners designed specifically for a UVA tanning bed or UVB tanning bed, as these cleaners are designed to prevent buildup that can cause blocking of both UVA and UVB rays. Any cleaner not specifically designed for tanning beds can cause buildup and prevent UVA and UVB rays from penetrating the acrylic.
Perhaps the most common cleaners on the market are premixed cleaners, DIY cleaner mixes, and tanning bed cleaner kits. Since they provide a cleaning agent, you mix with water and last longer, DIY cleaning mixes are ideal for a tanning salon. DIY mixes are usually sold in bulk and are more affordable for salon owners than buying a separate cleaner for each tanning bed. In general, premixed cleaners and cleaning kits are best for personal tanning beds. They generally cost a bit more than DIY mixes, but since personal beds don’t get cleaned as often as parlor beds,
When shopping for a tanning bed cleaner, keep in mind that the inside of your tanning bed isn’t the only part you’ll need to clean. You should also clean other parts, such as the fan, light bulbs, and the outer shell of the bed. Unlike the acrylic shell that touches the body, these parts do not need to be cleaned daily. Too many of them can be cleaned with the same tanning bed cleaner you use for acrylic or water, and some people regularly dust their fans with soft cloths or feathers to prevent the kind of dust buildup that requires deep cleaning. . Be sure to read your tanning bed’s instruction manual for the proper way to clean each of the bed’s components.